Note:We are not responsible for any damage it causes to your device.
CF-Root Package Contents:
CF-Root package comes with the following:
SuperSU v0.93
ClockworkMod (CWM) recovery v5.5
CWM Manager v3.60
Make sure you have installed all your USB drivers for the Samsung Galaxy S III to connect it with the computer. Download Samsung Galaxy S3 USB drivers! Apart from just the USB drivers, there are a few more things that you need to take care of.
1. You need to enable USB debugging mode. This helps to connect your Android phone with the PC. See here.
2. Your phone battery should be 80-85% charged. If your phone goes off suddenly because of battery, during flashing ROMs or installing mods and updates your phone might go dead permanently.
3. Backup all your important data that you might need as soon as your flash a new ROM, or make a backup for just in case, you never know when anything might go wrong.
Backup your SMS messages. How? –> How to Backup/Restore SMS Messages.
Backup Contacts, Gmail and Google Data. How? –> Sync with Google Sync.
Backup Call History
Backup WhatsApp Messages.
Backup APN Settings: GPRS, 3G, MMS Settings.
Data can also be backed up using Samsung KIES for their devices, but if you backup data manually, you get more options what top choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.
4. Your phone should be factory unlocked.
Complete Step-By-Step Instructions:
Step 1 - Download CF-Root-SGS3-v6.4.zip for Galaxy S3 to your computer and extract the zip file.
Step 2 - Download ODIN v1.85 (if needed) which will help you to install Android 4.1.1 on Samsung Galaxy S3 I9300.
Step 3 - Switch off your phone. Now go to Download Mode on your phone. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 - Make sure you have your Galaxy S3 USB drivers installed on your computer.
Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 - Now select the root package file that you have to flash/install on your phone. These files are to be found from the extracted file in Step 1.
Click on ‘PDA’ and select the file CF-Root-SGS3-v6.4.tar.
Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options. Do NOT touch any other options.
Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.
That’s it. Your Samsung Galaxy S III has now been rooted on Android 4.1.1 build XXDLI5 software update. Check for the Superuser app in your apps list to verify.
DOWNLOD LINKS FOR ALL THE ESENTIAL SOFTWARES
http://download.chainfire.eu/196/CF-Root/SGS3/CF-Root-SGS3-v6.4.zip
https://rapidshare.com/#!download|445p8|2195283307|Odin3_v1.85.zip|196|0|0 (if needed) which will help you to install Android 4.1.1 on Samsung Galaxy S3 I9300
.
No comments:
Post a Comment